Free SAP Certified Application Associate C_IBP_2105 Ultimate Study Guide (Updated 82 Questions)
Get to the Top with C_IBP_2105 Practice Exam Questions
C_IBP_2105 Exam Certification Details:
| Duration: | 180 mins |
| Exam: | 80 questions |
| Level: | Associate |
NEW QUESTION 21
When can filter blocks appear in calculations? Note: There are 2 correct Answers to this question.
- A. When modeling attribute as a key figure
- B. When modeling cross-period calculations
- C. When using IFISNULL statements in the formula
- D. When modeling attribute transformations
Answer: B,D
NEW QUESTION 22
For which of the following application jobs can you enter planning filters as parameters? Note: There are
2 correct Answers to this question.
- A. Create Time Periods for Time Profiles
- B. Purge Non-Conforming Data
- C. Purge Master Data
- D. Purge Key Figure Data
Answer: C,D
NEW QUESTION 23
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note:
There are 3 correct Answers to this question.
- A. These filters can be used together with attribute totals in the same planning view.
- B. You can only apply one value-based filter per planning view.
- C. These filters are always applied based on the values stored in the database.
- D. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- E. You can add (or delete) planning objects to a planning view after these filters are applied.
Answer: B,C,D
NEW QUESTION 24
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Detailed statistical analysis of demand data using predictive analytics tools
- B. Embedded, on-the-fly demand analytics
- C. Detailed statistical analysis of demand data using the supply chain algorithm library
- D. Demand sensing of demand data using the supply chain algorithm library
- E. Demand sensing of demand data using predictive analytics tools
Answer: A,B,D
NEW QUESTION 25
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.
- A. Selecting by attribute with option 'contain' is possible.
- B. Specifying source key figure is mandatory.
- C. Specifying target key figure that is time independent is possible.
- D. Specifying target key figure is mandatory.
Answer: B,D
NEW QUESTION 26
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.
- A. Location Product Sub Cost Rate
- B. Flag 'Disable Substitution of Location Products'
- C. Promotion duration
- D. Loc-Prod Subst Valid-From Date
Answer: C,D
NEW QUESTION 27
Which one of the following values can you use in disaggregation expressions?
- A. If (Attribute)=0
- B. KF1 (Stored) + Helper KF
- C. KF1 (Stored) + KF2 (Stored) + Attribute
- D. KF1 (Calculated) + Attribute
Answer: A
NEW QUESTION 28
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Units of measure are usually not time-independent.
- E. Analytics provide the user with the option to select the target unit of measure.
Answer: A,C,E
NEW QUESTION 29
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Periods are identified by a start and end date and profiles by an integer.
- B. Both periods and profiles are identified by an integer.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Periods are identified by an alphanumeric prefix and profiles by an integer.
Answer: A
NEW QUESTION 30
Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question.
- A. Violation of minimum aggregated inventory values
- B. Violation of minimum resource utilization
- C. Not respecting production capacity
- D. Not adhering to maximum transport values
- E. Not-fully satisfied demands
Answer: A,B,E
NEW QUESTION 31
What differentiates the Create New (Simple copy) and the Create New with Dependencies (Advanced copy) functions of a planning area? Note: There are 2 correct Answers to this question.
- A. A copy of the time profile is only created when you use the Create New with Dependencies (Advanced copy) function.
- B. The planning view favorites are only copied when you use the Advanced copy.
- C. Associated attributes are only shared between the original and the new planning area when you use the Create New (Simple copy) function.
- D. Master data is only shared between the original and the new planning area when you use the Create New (Simple copy) function.
Answer: A,D
NEW QUESTION 32
Which features apply to quota violations modeled with the optimizer?
- A. Quota violation cost is maintained as an attribute as a key figure.
- B. Min and Max Quotas have to be the same as sourcing ratios.
- C. Quotas require sourcing ratios to be maintained.
- D. Quotas can be modeled for sourcing location, production, and consensus demand.
Answer: C
NEW QUESTION 33
You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed? Note: There are 2 correct Answers to this question.
- A. Prioritization of demand elements one by one is achieved by heuristics.
- B. Push and Pull production models are used by the optimizer.
- C. Planning results can be generated faster by the optimizer.
- D. Finite heuristics can achieve demand prioritization and pegging.
Answer: B,D
NEW QUESTION 34
You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question.
- A. Create product substitutions.
- B. Enter transportation lead times.
- C. Set minimum and maximum lot sizes.
- D. Model adjusted transport receipts.
Answer: B,D
NEW QUESTION 35
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?
Note: There are 3 correct Answers to this question.
- A. It checks whether the sourcing in the Production Source Item Master Data type exists.
- B. It checks whether the required planning level master data exists for a subset of input key figures.
- C. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- D. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
- E. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
Answer: B,C,D
NEW QUESTION 36
Which property of an attribute will allow it to be used as an attribute as a key figure?
- A. Type INTEGER
- B. Type TIMESTAMP
- C. Type DECIMAL
- D. Type NAVCHAR
Answer: C
NEW QUESTION 37
Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? Note: There are 3 correct Answers to this question.
- A. Consensus demand planning
- B. Demand-driven materials requirement planning
- C. Finite resource capacities planning
- D. Rough-cut supply planning
- E. Executive review
Answer: A,D,E
NEW QUESTION 38
Which of these conditions must be met to create a Local Member key figure?
- A. Use Excel Cell References in Report Editor is selected.
- B. Activate Local Member Recognition is selected.
- C. A key figure is created in the Planning Area app.
- D. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
Answer: B
NEW QUESTION 39
You are invited to review a problem with a customer's SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct Answers to this question.
- A. Number of local members and complexity of calculations
- B. Complex calculation graphs for key figures
- C. Excessive IBP formatting in Excel UI
- D. Number of analytics charts displaying key figures' values
Answer: B,C
NEW QUESTION 40
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.
- A. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
- B. Excess stock can be generated and will need to be staged in an overflow warehouse.
- C. Capacity leveling will be possible for production and storage resources.
- D. Enough demands can be pulled forward and pull production will occur.
Answer: A,D
NEW QUESTION 41
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct Answers to this question.
- A. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- B. Supply chain graph in Supply Chain Network app
- C. Jobs in the Applications Jobs app
- D. Planning view templates in the SAP IBP add-in for Microsoft Excel
Answer: C,D
NEW QUESTION 42
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using aggregation mode average
- B. Using key figure calculation
- C. Using local member
- D. Using attribute as a key figure
Answer: A
NEW QUESTION 43
Analytics charts are created by the user in the Advanced Analytics application. What actions are possible in the Advanced Analytics app? Note: There are 2 correct Answers to this question.
- A. Apply filters on your data.
- B. Merge charts together.
- C. Group data.
- D. Open graphics in Excel.
Answer: A,C
NEW QUESTION 44
You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.
- A. Run a scenario-specific demand sensing job.
- B. Run a scenario-specific inventory optimization job.
- C. Share data with other users.
- D. Change scenario-specific master data.
- E. Display data in analytics.
Answer: B,C,E
NEW QUESTION 45
......
SAP C_IBP_2105 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| Demand Planning 8% - 12% | Create statistical forecast using historical data with basic methods. |
| General Configuration of a Planning Area > 12% | Display, create, copy, edit, check, and activate a planning area. |
| Solution Architecture < 8% | Describe the benefits of implementing SAP's Integrated Business Planning solution. |
| Planning Operators & Application Jobs > 12% | Use Planning Operators. |
| Inventory < 8% | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. |
| Analytics and Reporting < 8% | Define and view information with user-defined charts and dashboards. |
| User Interface > 12% | Use the Fiori Launchpad to customize the UI, work with Excel UI |
| S&OP Review < 8% | Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans. |
Pass SAP C_IBP_2105 exam - questions - convert Tets Engine to PDF: https://prep4sure.dumpsfree.com/C_IBP_2105-valid-exam.html