High quality

The management objective of our company is "the quality first and the customer is supreme ". Therefore, our company has been continuously in pursuit of high quality for our 642-832 test simulation questions during the ten years in order to provide dependable and satisfied study materials with superior quality for you. We can tell that even though our company didn't spend a lot of money on advertising of 642-832 study guide questions we still have a large amount of regular customers who are from many different countries in the international market, the reason is very simple, namely, high quality of 642-832 test questions is the best advertisement for any kind of products. If you want to buy study materials which have the highest quality, our 642-832 test simulation questions worth your consideration.

Are you still only using paper edition books to prepare for Cisco 642-832? If so, maybe you are left behind the times. There is no doubt that in an age with rapid development of science and technology (642-832 test questions), various electronic devices are playing more and more significant and increasing roles in our daily life, therefore, it is really necessary for you to attach greater importance to electronic 642-832 test dumps when you are preparing for your coming exam. Our company has been engaged in compiling electronic 642-832 study guide questions in this field for nearly ten years, now, we are glad to share our fruits with all of the workers in this field. The striking points of our 642-832 test questions are as follows.

Less time for high efficiency

It is quite clear that the reason why the 642-832 exam can serve as the road block in the way of success for a majority of workers in this field is that there are a lot of eccentric questions in the Cisco 642-832 exam, but if you know the key knowledge of which you can solve the problems easily. So our top experts have compiled all of the key points as well as the latest question types in our 642-832 test simulation questions, the concentration is the essence, we can assure you that it is enough for you to spend 20 to 30 hours to practice all of the questions in our 642-832 test dumps questions. We strongly believe that after you have command of all of the key points you can pass the exam as easy as pie, at that time, you will definitely feel how careful and considerate our exports who compiled the 642-832 study guide questions are from.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Advanced operation system

During the ten years, our company have put a majority of our energy on the core technology of 642-832 test dumps to ensure the fastest delivery speed as well as protecting the personal information of our customers in order to create a better users' experience of our 642-832 study guide questions. After so many years of hard work, our company has already achieved success in this field, on the one hand, now, we can assure you that our the most advanced intelligent operation system will automatically send the 642-832 test simulation questions for you within only 5 to 10 minutes after payment. On the other hand, all of your personal information will be encrypted immediately after payment by our advanced operation system. So you really can rest assured to buy our 642-832 test questions. Your time is so precious, there is no reason for you to hesitate any longer, just take action right now!

Cisco Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) Sample Questions:

1. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?

A) IPv6 OSPF Routing
B) IP NAT
C) NTP
D) IPv4 layer 3 security
E) BGP
F) IPv4 OSPF Redistribution
G) IPv4 OSPF Routing

2. Refer to the configuration statements shown in the graphic above. R1(config)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1 R1(config)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1 R1(config)#end R1#debug ip packet 199 detail Which statement reflects what the effect is of this configuration sequence?

A) These commands will only work when you specify only one host rather than two.
B) These commands will have no effect at all. The debug ip packet command will work as normal and display info for all IP packets.
C) These commands will generate an error message because you cannot use an access list with any debug commands.
D) These commands turn on debug ip packet only for packets between hosts 10.1.1.1 and 172.16.1.1.

3. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
Client is unable to ping IP 209.65.200.241

A) Enable EIGRP on the FastEthernet0/0 and FastEthernet0/1 interface using the no passive- interface command.
B) Under the EIGRP process, delete the network 10.1.4.0 0.0.0.255 command and enter the network
10.1.4.4 0.0.0.252 and 10.1.4.8 0.0.0.252 commands.
C) Change the AS number on the EIGRP routing process from 1 to 10 to much the AS number used on DSW1 and DSW2.
D) Disable auto summary on the EIGRP process

4. Topic 12, Ticket 10 : VLAN Access Map
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the
ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside
(209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1
and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the
underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several
implementations. This involved changing the configuration on one or more of the devices. You will be
presented with a series of trouble tickets related to issues introduced during these configurations.
Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution

Client 1 is unable to ping IP 209.65.200.241

5. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?


Client is unable to ping IP 209.65.200.241

A) IPv6 OSPF Routing
B) IPv4 EIGRP Routing
C) NTP
D) IPv4 Route Redistribution
E) IPv4 layer 3 security
F) IPv4 and IPv6 Interoperability
G) IPv4 OSPF Routing
H) IP DHCP Server
I) IPv6 RIP Routing

Solutions: